201 Series Portable Drum Rollers
Mix the Contents of a Closed Drum Without Even Opening It! NO Mess... NO Exposure or Contamination! Morse Portable Drum Rollers mix right inside a sealed drum. Mixing drums is easy with a compact, portable Morse industrial drum mixer.
Key features
- Compact industrial drum mixers to roll a closed drum on its side to agitate contents
- Mix 30 or 55 gallon (114 or 210 liter) steel drum from 6" to 28" (15 to 71 cm) diameter, and up to 38" (96.5 cm) tall
- Add Option # POLY-201 to roll PLASTIC drum
- Add Option # 1-5P Idler Attachment for 1 to 5 gallon (2 to 20 liter) size can or pail
- Use as drain stand to dispense drum
- Select Fixed or Variable Speed Drum Roller
- Electric or Air powered drum rollers available
Morse 201 Series 55-Gallon (210 liter) Portable Drum Rollers agitate your drum's contents without even opening the drum! Incorporate important stratified or settled ingredients and eliminate sediment in the bottom of your drum.
Mixing in a closed drum eliminates the hazards of worker exposure, and the messy cleanup associated with insertion mixers.
Mixing in a closed drum eliminates the hazards of worker exposure, and the messy cleanup associated with insertion mixers.

201 Series WHEELED Steel Drum Rollers
Compact, portable mixer rolls closed drum to blend contents.
Also dispense directly from horizontal drum through faucet.
Available with Fixed RPM or Variable Speed.
For PLASTIC drum, order NEW drum roller with OPTION POLY-201 installed.

201B Series BELTED Portable FIBER Drum Rollers
Mix the contents of a closed FIBER drum. Choose model with Fixed RPM or Variable Speed.
Fiber drum contents can be difficult to mix by hand, and lead to uneven mixing and inconsistent results. Morse belted fiber drum mixers rotate the drum to agitate the contents and ensure the product is evenly mixed.

Place your drum onto the base plate of the 55-gallon drum mixer with a drum truck or a below-hook drum lifter.

Tipping lever hook engages drum top rim to load. The built-in tipping bar provides leverage to assist in loading a drum upright onto the drum roller, and setting the drum back to upright when drum mixing is finished. The sides and back are enclosed to protect the drive.

Combine two components to meet safety requirements:
OSHA requires guard enclosure with safety interlock, so drum rotator automatically stops if enclosure is opened.
- Drum Rotator
- Guard Enclosure Kit (sold separately)
OSHA requires guard enclosure with safety interlock, so drum rotator automatically stops if enclosure is opened.
OPTIONS and ACCESSORIES

Roll a plastic drum on a wheeled Portable Drum Roller. Roll a plastic OR a steel drum with this kit installed.
Option POLY-201
Factory installed OPTION on a new Portable Drum Roller
Kit POLY-201FI
Kit for customer to install on Portable Drum Roller
- Extra wheels to support flexible plastic drum
- End stop to prevent drum traveling
- Chain to assist in tipping upright drum over to rolling position
Option POLY-201
Factory installed OPTION on a new Portable Drum Roller
Kit POLY-201FI
Kit for customer to install on Portable Drum Roller
Idler Attachment 1-5P
Install 1-5P Idler Attachment on a Portable Drum Roller to roll 1 to 5 gallon (4 to 20 liter) can or pail. Collars adjust for up to 18" (45.7 cm) tall cylinder. Install on Portable Drum Roller with 4 bolts.
Install 1-5P Idler Attachment on a Portable Drum Roller to roll 1 to 5 gallon (4 to 20 liter) can or pail. Collars adjust for up to 18" (45.7 cm) tall cylinder. Install on Portable Drum Roller with 4 bolts.
Portable Drum Rotators with standard 1/2 HP, 60Hz, 1 phase TEFC motor include switch, cord and plug. All other electric 55-gallon (210 liter) drum mixers (i.e. Explosion proof, 3 phase, etc.) are shipped without switch, cord and plug. These must be installed by electrician according to local codes and customer's preference.
Explosion Proof motors are rated for Class I Group D, and Class II Groups F and G. Expect a 20% reduction in drum RPM for models with 50 Hz motors. Air motors are vane-type and require correctly sized filter, regulator, lubricator, valve (FRL) and piping supplied by customer. (Filter, regulator and lubricator (FRL) may be ordered from Morse as Part # 90020-P. Description: KIT, 3/8" FRL & BALL VALVE)
201B Series Belted Portable Drum Rollers have a pair of belts between rollers (instead of wheels) to turn drum. Belts allow it to roll a fiber drum from 16" to 23" (41 to 59 cm) diameter, up to 35" (89 cm) tall, and weighing up to 300 Lb. (136 kg) at 10 to 20 RPM, without damaging the fiber sidewall. Belted portable drum rollers are available with the same drum speeds and motor types.
Customers use Morse Drum Mixers to:
IMPORTANT: OSHA holds the employer responsible for the suitability of design and application of tools and machinery.
Install all Morse Rotators in accordance with requirements for enclosure and safety interlock, etc. One way to accomplish this is with a Morse enclosure with safety interlock, so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.
For OSHA compliance in the USA, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place."
Explosion Proof motors are rated for Class I Group D, and Class II Groups F and G. Expect a 20% reduction in drum RPM for models with 50 Hz motors. Air motors are vane-type and require correctly sized filter, regulator, lubricator, valve (FRL) and piping supplied by customer. (Filter, regulator and lubricator (FRL) may be ordered from Morse as Part # 90020-P. Description: KIT, 3/8" FRL & BALL VALVE)
201B Series Belted Portable Drum Rollers have a pair of belts between rollers (instead of wheels) to turn drum. Belts allow it to roll a fiber drum from 16" to 23" (41 to 59 cm) diameter, up to 35" (89 cm) tall, and weighing up to 300 Lb. (136 kg) at 10 to 20 RPM, without damaging the fiber sidewall. Belted portable drum rollers are available with the same drum speeds and motor types.
Customers use Morse Drum Mixers to:
- Blend batches of powder
- Ensure uniform batches
- Mix paint, oils, urethane resin, glue, dyes, flavors, etc.
- Use as a chemical drum mixer
- Blend drum contents into homogenous product prior to use
- Keep epoxy from separating
- Grind and smooth parts in media
- Homogenize tailings and sediment samples
- Plasma spray powder mixing
- Roll propellant casting tubes for chemical prep prior to cast
IMPORTANT: OSHA holds the employer responsible for the suitability of design and application of tools and machinery.
Install all Morse Rotators in accordance with requirements for enclosure and safety interlock, etc. One way to accomplish this is with a Morse enclosure with safety interlock, so the rotator automatically turns off when enclosure door is opened. Power connections and motor controls must also comply with applicable local codes.
For OSHA compliance in the USA, see OSHA subpart O.1910.212(a)(4) "Barrels, containers, and drums. Revolving drums, barrels, and containers shall be guarded by an enclosure which is interlocked with the drive mechanism, so that the barrel, drum, or container cannot revolve unless the guard enclosure is in place."
Model Chart
What features do you need?
Motor style | Phase | Voltage / Amp Draw | Explosion proof | Drum RPM | Control Package | Guard Enclosure Kit | Model |
---|---|---|---|---|---|---|---|
60Hz | 1 | 115v / 7.4 | N | 20 RPM | GEK-201-1 | 201/20-1 | |
50Hz | 1 | 110v / 7.2 220v / 3.6 |
N | 16 RPM |
CP-201-1-220-50 |
GEK-201-1 | 201/20-1-50 |
60Hz | 3 | 208v / 2.5 230v / 2.0 460v / 1.0 |
N | 20 RPM |
CP-201-3-230 CP-201-3-460 |
GEK-201-3 | 201/20-3 |
50Hz | 3 | 230v / 1.7 400v / 1.0 |
N | 16 RPM |
CP-201-3-230-50 CP-201-3-400-50 |
GEK-201-3 | 201/20-3-50 |
60Hz | 3 | 575v / 0.8 | N | 20 RPM |
CP-201-3-575 |
GEK-201-3 | 201/20-575 |
- | N | 20 RPM | GEK-201-A | 201/20-A | |||
60Hz | 1 | 115v / 7.4 208v / 3.9 230v / 3.7 |
Y | 20 RPM |
CP-201-E1-115 CP-201-E1-230 |
GEK-201-E1 | 201/20-E1 |
50Hz | 1 | 110v / 7.2 220v / 3.6 |
Y | 16 RPM |
CP-201-E1-220-50 |
GEK-201-E1 | 201/20-E1-50 |
60Hz | 3 | 208v / 2.1 230v / 2.0 460v / 1.0 |
Y | 20 RPM |
CP-201-E3-208 CP-201-E3-230 CP-201-E3-460 |
GEK-201-E3 | 201/20-E3 |
50Hz | 3 | 230v / 1.7 400v / 1.0 |
Y | 16 RPM |
CP-201-E3-230-50 CP-201-E3-400-50 |
GEK-201-E3 | 201/20-E3-50 |
60Hz | 3 | 575v / 0.7 | Y | 20 RPM |
CP-201-E3-575 |
GEK-201-E3 | 201/20-E575 |
60Hz | 1 | 115v / 7.4 | N | 20 RPM | GEK-201-1 | 201B/20-1 | |
50Hz | 1 | 110v / 7.2 220v / 3.6 |
N | 16 RPM |
CP-201-1-220-50 |
GEK-201-1 | 201B/20-1-50 |
60Hz | 3 | 208v / 2.5 230v / 2.0 460v / 1.0 |
N | 20 RPM |
CP-201-3-230 CP-201-3-460 |
GEK-201-3 | 201B/20-3 |
50Hz | 3 | 230v / 1.7 400v / 1.0 |
N | 16 RPM |
CP-201-3-230-50 CP-201-3-400-50 |
GEK-201-3 | 201B/20-3-50 |
60Hz | 3 | 575v / 0.8 | N | 20 RPM |
CP-201-3-575 |
GEK-201-3 | 201B/20-575 |
- | N | 20 RPM | GEK-201-A | 201b/20-a | |||
60Hz | 1 | 115v / 7.4 208v / 3.9 230v / 3.7 |
Y | 20 RPM |
CP-201-E1-115 CP-201-E1-230 |
GEK-201-E1 | 201B/20-E1 |
50Hz | 1 | 110v / 7.2 220v / 3.6 |
Y | 16 RPM |
CP-201-E1-220-50 |
GEK-201-E1 | 201B/20-E1-50 |
60Hz | 3 | 208v / 2.1 230v / 2.0 460v / 1.0 |
Y | 20 RPM |
CP-201-E3-208 CP-201-E3-230 CP-201-E3-460 |
GEK-201-E3 | 201B/20-E3 |
50Hz | 3 | 230v / 1.7 400v / 1.0 |
Y | 16 RPM |
CP-201-E3-230-50 CP-201-E3-400-50 |
GEK-201-E3 | 201B/20-E3-50 |
60Hz | 3 | 575v / 0.7 | Y | 20 RPM |
CP-201-E3-575 |
GEK-201-E3 | 201B/20-E575 |
60Hz | 1 | 115v / 7.4 | N | 15 to 24 RPM | GEK-201-1 | 201BVS-1 | |
50Hz | 1 | 110v / 7.2 220v / 3.6 |
N | 13 to 20 RPM |
CP-201-1-220-50 |
GEK-201-1 | 201BVS-1-50 |
60Hz | 3 | 208v / 2.5 230v / 2.0 460v / 1.0 |
N | 15 to 24 RPM |
CP-201-3-230 CP-201-3-460 |
GEK-201-3 | 201BVS-3 |
50Hz | 3 | 230v / 1.7 400v / 1.0 |
N | 13 to 20 RPM |
CP-201-3-230-50 CP-201-3-400-50 |
GEK-201-3 | 201BVS-3-50 |
60Hz | 3 | 575v / 0.8 | N | 15 to 24 RPM |
CP-201-3-575 |
GEK-201-3 | 201BVS-575 |
- | N | 13 to 20 RPM | GEK-201-A | 201BVS-A | |||
60Hz | 1 | 115v / 7.4 208v / 3.9 230v / 3.7 |
Y | 15 to 24 RPM |
CP-201-E1-115 CP-201-E1-230 |
GEK-201-E1 | 201BVS-E1 |
50Hz | 1 | 110v / 7.2 220v / 3.6 |
Y | 13 to 20 RPM |
CP-201-E1-220-50 |
GEK-201-E1 | 201BVS-E1-50 |
60Hz | 3 | 208v / 2.1 230v / 2.0 460v / 1.0 |
Y | 15 to 24 RPM |
CP-201-E3-208 CP-201-E3-230 CP-201-E3-460 |
GEK-201-E3 | 201BVS-E3 |
50Hz | 3 | 230v / 1.7 400v / 1.0 |
Y | 13 to 20 RPM |
CP-201-E3-230-50 CP-201-E3-400-50 |
GEK-201-E3 | 201BVS-E3-50 |
60Hz | 3 | 575v / 0.7 | Y | 15 to 24 RPM |
CP-201-E3-575 |
GEK-201-E3 | 201BVS-E575 |
60Hz | 1 | 115v / 7.4 | N | 15 to 24 RPM | GEK-201-1 | 201VS-1 | |
50Hz | 1 | 110v / 7.2 220v / 3.6 |
N | 13 to 20 RPM |
CP-201-1-220-50 |
GEK-201-1 | 201VS-1-50 |
60Hz | 3 | 208v / 1.7 230v / 1.6 460v / 0.8 |
N | 15 to 24 RPM |
CP-201-3-230 CP-201-3-460 |
GEK-201-3 | 201VS-3 |
50Hz | 3 | 230v / 1.7 400v / 1.0 |
N | 13 to 20 RPM |
CP-201-3-230-50 CP-201-3-400-50 |
GEK-201-3 | 201VS-3-50 |
60Hz | 3 | 575v / 0.8 | N | 15 to 24 RPM |
CP-201-3-575 |
GEK-201-3 | 201VS-575 |
- | N | 15 to 24 RPM | GEK-201-A | 201VS-A | |||
60Hz | 1 | 115v / 7.4 208v / 3.9 230v / 3.7 |
Y | 15 to 24 RPM |
CP-201-E1-115 CP-201-E1-230 |
GEK-201-E1 | 201VS-E1 |
50Hz | 1 | 110v / 7.2 220v / 3.6 |
Y | 13 to 20 RPM |
CP-201-E1-220-50 |
GEK-201-E1 | 201VS-E1-50 |
60Hz | 3 | 208v / 2.1 230v / 2.0 460v / 1.0 |
Y | 15 to 24 RPM |
CP-201-E3-208 CP-201-E3-230 CP-201-E3-460 |
GEK-201-E3 | 201vs-e3 |
50Hz | 3 | 230v / 1.7 400v / 1.0 |
Y | 13 to 20 RPM |
CP-201-E3-230-50 CP-201-E3-400-50 |
GEK-201-E3 | 201VS-E3-50 |
60Hz | 3 | 575v / 0.7 | Y | 15 to 24 RPM |
CP-201-E3-575 |
GEK-201-E3 | 201VS-E575 |
California Proposition 65 Information

WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
For more information go to www.P65Warnings.ca.gov