Model 5-VF-60-20

60 Degree Drum Cone to control dispensing of dry material. Fits 20-3/8" (51.75 cm) drum rim outside diameter with lid removed.

All about Model 5-VF-60-20
Specific to Model 5-VF-60-20
  • 60 Degree Drum Cone made of 16 gauge carbon steel
  • Fits 20-3/8" (51.75 cm) drum rim outside diameter, measured with drum lid removed
  • Has 6" (15.2 cm) diameter discharge opening with valve flange
  • Order separate Clamp Collar model 7-20 to Secure Cone to drum
  • Attach valve to Cone flange to stop, start and control flow
  • Valves Kits each sold separately
    • Kit IV is Iris Valve
    • Kit SG is Slide Gate
All Drum Cones
  • Replace your drum lid with a drum cone
  • Control dumping of DRY MATERIAL from a drum
  • Greatly reduce dust when discharging dry material
  • Extend the reach of pour
  • Install either a slide gate or an iris valve with 6" (15.24 cm) opening to start and stop dispensing
  • Drum cones work with a steel drum or a fiber drum
  • Drum Cone capacity exceeds the capacity of all Morse drum handlers when properly secured to drum with correct size Morse Clamp Collar
  • IMPORTANT: Determine the Correct Size Drum Cone and Clamp Collar
    1. Remove drum lid BEFORE measuring
    2. Measure drum OUTSIDE diameter across Top Rim WITHOUT drum lid
3616X-P thumbnail image 3616X-P

Fully enclosed crate for export of model 86, 86-SS or asymmetric drum cone. Heat treated and certified IPPC compliant.
7-20 thumbnail image 7-20

Clamp Collar to Secure Drum Cone to Drum Top. Fits 20-3/8" (51.75 cm) outside diameter drum rim with drum lid removed.
7SS-20 thumbnail image 7SS-20

Stainless Steel Clamp Collar to Secure Drum Cone to Drum Top. Fits 20-3/8" (51.75 cm) drum rim outside diameter with drum lid removed.
4556CM-P thumbnail image 4556CM-P

Kit: Bracket with Spark Resistant Parts for drum with Drum Cone. Prevents drum slipping length-ways. Adjust for 30-38" (76-96.5 cm) tall.
4556CSS-P thumbnail image 4556CSS-P

Kit: Stainless Steel Bracket for drum with Drum Cone. Prevents drum from slipping length-ways. Adjust for 30"-38" (76-96.5 cm) tall drum.
4556C-P thumbnail image 4556C-P

Kit: Bracket for use with Drum Cone attached attached to drum. Prevents drum from slipping length-ways. Adjust for 30"-38" (76.2-96.5 cm) tall drum.
IV thumbnail image IV

Iris Valve Kit with aluminum body and 6" (15.24 cm) diameter opening. CUSTOMER to install on valve flange of Drum Cone.
SG thumbnail image SG

Slide Gate Valve Kit with 6" (15.24 cm) diameter opening. CUSTOMER to install on valve flange of Drum Cone. NOT for use w/ extension tube XT.
SG-SS thumbnail image SG-SS

Stainless Steel Slide Gate Kit with 6" (15.24 cm) dia opening. CUSTOMER to install on valve flange of cone. NOT for use w/ extension tube XT-SS.
XT thumbnail image XT

Extension Tube Kit. 5" (12.7 cm) long with 6" (15.24 cm) diameter. CUSTOMER to install ONLY on Iris Valve or Drum Cone valve flange.
XT-SS thumbnail image XT-SS

Stainless Steel Extension Tube Kit. 5" (12.7 cm) long with 6" (15.24 cm) diameter.CUSTOMER to install on Iris Valve of Drum Cone valve flange.
Not available.
sticky note 4-digit serial numbers are simply the month & year of manufacture.
Example: 1120 is November 2020

No videos available.

Specifications

Proposition 65 warningWARNING – This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Ship length 28" (71.12 cm)
Ship width 19" (48.26 cm)
Ship height 30" (76.20 cm)
Ship weight 35 Lb. (15.89 kg)
Ship class 85