Images of Morse Omni-Lift Drum Rackers / Drum Stackers
|Omni-Lift Drum Racker images|
Rack a drum up to 72" (183 cm) high with a Morse Omni-Lift Drum Racker.
Model 405 shown has hand pump drum lift and hand crank drum tilt control.
Approach upright drum with drum racker with two chine catches below the drum rim.
Secure drum into holder by tightening the web strap and ratchet between the drum ribs.
Raise drum and rotate to horizontal drum racking position.
Once drum is horizontal, release the web strap and ratchet. Your drum then rests in the Omni-Lift drum holder to enable placing it into a rack.
Morse Omni-Lift Drum Rackers require adequate spacing between drums.
See rack configuration page.
Place drum onto drum rack. Then back drum racker away.
To remove a drum from a rack, simply reverse the procedure. Ensure that chine catches are engaged below drum rim and drum is secured with web strap and ratchet BEFORE tilting from horizontal position.
|Option # 3313-P - Pad Kit to Rack a 55-gallon rimmed plastic drum|
Pad Kit to Rack a 55-gallon rimmed plastic drum - Option # 3313-P
NOTE: Models with spark resistant parts already include Poly Drum Pad Kit.
Omni-Lift Drum Rackers / Drum Stackers
Last Updated: 03/13/19
|California Proposition 65 Information|
|WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov|