309-E3-575
Morse Drum Tumblers rotate a drum "corner-over-corner" to vigorously mix drum contents
Tumble a plastic, steel or fiber drum of various sizes. Drum Tumbler shown with Control Package (sold separately).
Shown here tumbling a 30-gallon plastic drum. Drum Tumbler shown with Control Package (sold separately).
Drum Tumbler mixing the contents of a fiber drum. Drum Tumbler shown with Control Package (sold separately).
Load a drum onto Drum Tumbler with Model 92 Below-Hook Drum Lifter and your hoist. Shown with Control Package (sold separately).
Guide the drum so that it tilts back and seats into the drum mixer as it is lowered. Drum Tumbler shown with Control Package (sold separately).
Screw down the two top clamps on top of drum
Tighten the ratchet strap around the drum
Drum holder supports the drum from below, has two screw-down clamps on top of the drum, and a web strap around the drum
Enclosure with safety interlock automatically shuts off drum tumbler when the door is opened
Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.
Single Drum Tumbler. Ex-Proof 3-Phase 575V 60Hz Motor. REQUIRES Controls to Start/Stop. OSHA REQUIRES Enclosure with Interlock.
309-E3-575
- Model 309-E3-575 has explosion-proof 3-phase 575V 60Hz motor
- Rotates drum at 14 RPM
- REQUIRES Electric Control Box to Start / Stop Rotator
- Electric Control Package sold separately
- Model CP-309-E3-575 Explosion-Proof Control Box for 3-phase 575 60Hz
- Guard Enclosure Kit sold separately as model GEK-309-E3
- IMPORTANT: OSHA, CSA and EU require Enclosure with Safety Interlock
- Barrel mixers blend contents inside CLOSED drum to reduce hazards and worker exposure
- Prevent messy cleanup of insertion mixers
- Incorporate sediment and homogenize stratified valuable ingredients
- Lift upright drum to load into tumbler with:
- Your hoist and model 92 Below-Hook Drum Lifter
- Your forklift, model 284 Fork Hook and model 92 Below-Hook Drum Lifter
- Mix products inside a closed steel, plastic or fiber drum
- 29" to 37" (74 to 94 cm) tall
- 18" to 23.5" (46 to 60 cm) in diameter
- Typical 30 to 55 gallon (114 to 210 liter) size drum
General
| Drum RPM | 14 RPM
RPM is based on 22.5" (57.15 cm) diameter drum. |
| Full Capacity | 800 Lb. (363.20 kg) |
| Half-full Capacity | 400 Lb. (181.60 kg)
Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. |
Motor information
| Phase | 3 |
| HP | 1.00 |
| Style | Explosion proof |
| Explosion proof | Yes - Motor is not wired, consult a qualified electrician to complete wiring per local codes. |
| Frequency | 60Hz |
| Voltage / Amp draw | 575v / 1.2 |
Shipping information
| Ship length | 72" (182.88 cm) |
| Ship width | 42" (106.68 cm) |
| Ship height | 46" (116.84 cm) |
| Ship weight | 638 Lb. (289.65 kg) |
| Ship class | 150 |
4-digit serial numbers are simply the month & year of manufacture. Example: 1120 is November 2020
Current
|
CP-309-E3-575
Control Package for 309-E3-575 Drum Tumbler. Explosion-Proof 3-PH 575V 60Hz 14 RPM. Start/Stop, Run/Jog. Consult electrician for wiring. |
|
GEK-309-E3
Kit: Enclosure with Safety Interlock for CUSTOMER to install with 309 Exp-Proof 3-PH AC Single Tumbler. SHIPS SEPARATELY W/ 2ND FREIGHT BILL |
| 5979Xi-P
Fully enclosed crate for export of 309 Series with NO GEK. Heat treated and certified IPPC compliant. |
|
| 5980Xi-P
Fully enclosed crate for export of 309 with Enclosure Kit (NOT set up). Crate is heat treated and certified IPPC compliant. |
|
| 6589W-P
Top hold down bar for drum holder 5801-P used on 309, 310 and 311 Series Drum Tumblers. |
|
|
6637I-P
OPTION: Factory Installed cinch chain on drum holder 5801-p used on 309, 310 & 311 drum tumblers. Replaces ratchet web strap. |
| FAT-309
OPTION: Complete Factory Acceptance Test form FAT-309 and ship completed form in literature packet with NEW 309 Series Drum Tumbler. |
California Proposition 65 Information
For more information go to www.P65Warnings.ca.gov
Popular Options
View all options
Kit: Enclosure with Safety Interlock for CUSTOMER to install with 309 Exp-Proof 3-PH AC Single Tumbler. SHIPS SEPARATELY W/ 2ND FREIGHT BILL
Control Package for 309-E3-575 Drum Tumbler. Explosion-Proof 3-PH 575V 60Hz 14 RPM. Start/Stop, Run/Jog. Consult electrician for wiring.
OPTION: Complete Factory Acceptance Test form FAT-309 and ship completed form in literature packet with NEW 309 Series Drum Tumbler.
Recomended Spare Parts Kits
Optional Kit: Recommended Spare Parts for 1-309 Series. (Click image for list of parts)