310-3-50-CE


Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.

CE-Marked Tilt-To-Load Drum Tumbler. 3-Phase 400V 50Hz Motor. Includes Control Package, Enclosure with Interlock and Crate for Export.


310-3-50-CE

Specific to model 310-3-50-CE...
  • Model 310-1-50-CE is CE-Marked and Certified
  • ONLY for country with 3-phase 400V 50Hz power supply
  • Adjust drum rotation from 4 to 16 RPM
  • Includes the following as a complete CE-Marked and Certified unit
    • Drum Tumbler model 310-3-50
    • Electric Control Package model CP-310-3-400-50
    • Guard Enclosure Kit with Safety Interlock model GEK-310-3
    • Fully enclosed export crate model 5480X-P
All 310 Series Tilt-To-Load Drum Tumblers...
  • IMPORTANT: OSHA, CSA and EU require Enclosure with Safety Interlock
  • Vigorous "Corner-Over-Corner" Drum Mixing
  • Easy Floor-Level Loading of Upright Drum. Then Tilt Drum Holder Up for Mixing.
  • Load upright drum...
    • with drum truck
    • with below-hook drum lifter and your hoist
  • Mixing inside a closed drum reduces hazards and worker exposure
  • Incorporate sediment and homogenize valuable ingredients
  • Avoid messy cleanup of insertion mixers
  • Mix contents of steel, plastic or fiber drum
    • 29" to 37" (74 to 94 cm) tall
    • 18" to 23.5" (46 to 60 cm) in diameter
    • Typical 30 to 55 gallon (114 to 210 liter) size drum
REQUEST QUOTE CLICK TO CALL

General

Drum RPM4 to 16 RPM

RPM is based on 22.5" (57.15 cm) diameter drum.

Full Capacity

800 Lb. (363.2 kg)

Half-full Capacity400 Lb. (181.6 kg)

Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum.

Motor information

Phase3
HP2.00
StyleTEFC (Totally enclosed fan cooled)
Explosion proof No
Frequency50Hz
Voltage / Amp draw400v / 2.9

Shipping information

Ship length90" (228.6 cm)
Ship width71" (180.34 cm)
Ship height72" (182.88 cm)
Ship weight1680 Lb. (762.72 kg)
Ship class150
sticky note 4-digit serial numbers are simply the month & year of manufacture.
Example: 1120 is November 2020
Click serial range to download.
Spec Sheet
Serial range

310 CE-Marked Drum Tumblers

310 Series Tilt-To-Load Drum Tumblers
Click serial range to download.
Operators Manual and Parts Diagram
Serial range

310 CE-Marked Tilt-To-Load Drum Tumbler

Enclosure Kit Installation Instructions for CE Rotators

Hydraulic Power Pack

Oil Cooler Kit for Customer to Install
Operators Manual
Serial range

Control Package

Grease for Pillow Block Bearing
Parts Diagram
Serial range

Factory Installed Oil Cooler
Click serial range to download.
Wiring Diagram
Serial range

3186-3-50-P Motor Wiring Diagram

5538-P Control Box Wiring Diagram
4963-P

2" Cylinder Seal Kit, 4572-P DF

5014I-P

OPTION: Factory Installed Oil Cooler on NEW AC Powered 310 Series drum tumbler

6589W-P

Top hold down bar for drum holder 5801-p used on 309, 310 and 311 series drum tumblers.

6637I-P thumbnail image 6637I-P

Factory Installed Cinch Chain OPTION

California Proposition 65 Information


...
WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov
QUICK QUOTE