456-E3-50
Morse Hydra-Lift Drum Rotators roll a drum on its side to mix drum contents
456
456 Hydra-lift Drum Rollers
Load upright drum with a drum truck
Load upright drum with your hoist and a below-hook drum lifter
Hydra-Lift Drum Rotators have hydraulic power tilt control to raise drum from upright and lay it down in rolling position.
Close the Enclosure to engage interlock. Then tilt over to horizontal drum rolling position.
Enclosure with safety interlock automatically shuts off the drum tumbler when the door is opened.
Option # POLY-456 Roll your 55-gallon plastic drum on a Hydra-Lift Drum Roller, adds extra wheels and an end stop to prevent your drum from traveling lengthways during rolling.
Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.
Hydra-Lift Drum Roller. Exp-Proof 230/400V 50Hz Motor. REQUIRES Electric Controls to Start/Stop. CE REQUIRES Enclosure with Interlock.
456-E3-50
- Model 456-E3-50 has explosion-proof 3-phase 230/400V 50Hz motor
- ONLY for country with 50Hz power
- Adjust drum rotation speed
- REQUIRES Electric Control Box to Start / Stop Rotator
- Electric Control Package sold separately
- Model CP-456-E3-230-50 for 3-phase 230V 50Hz power supply
- Model CP-456-E3-400-50 for 3-phase 400V 50Hz power supply
- Guard Enclosure Kit sold separately as model GEK-456-E3
- IMPORTANT: OSHA, CSA and EU require enclosure with safety interlock
- Load upright drum at floor level with drum truck, or with below-hook drum lifter and your crane
- Hydraulic Power-Tilt drum over onto roller wheels
- Roll STEEL drum with 6" to 26" (15 to 66 cm) diameter, and maximum 40" (102 cm) length
- To roll a PLASTIC drum, add Option POLY-456
- To roll 1-to-5 gallon cylindrical can, install Idler Attachment 1-5-1
- Maximum ambient operating temperature: 130°F (54°C)
General
| Drum RPM | 4 to 14 RPM
RPM is based on 22.5" (57.15 cm) diameter drum. |
| Liquid Capacity | 1000 Lb. (454.00 kg) |
| Dryload Capacity | 400 Lb. (181.60 kg)
A shifting dry load exerts greater stress on the drum rotator than the fluid motion of a liquid load. |
Motor information
| Phase | 3 |
| HP | 1.00 |
| Style | Explosion proof |
| Explosion proof | Yes - Motor is not wired, consult a qualified electrician to complete wiring per local codes. |
| Frequency | 50Hz |
| Voltage / Amp draw | 230v / 3.5 |
| Voltage / Amp draw | 400v / 2.0 |
Shipping information
| Ship length | 72" (182.88 cm) |
| Ship width | 42" (106.68 cm) |
| Ship height | 46" (116.84 cm) |
| Ship weight | 676 Lb. (306.90 kg) |
| Ship class | 70 |
4-digit serial numbers are simply the month & year of manufacture. Example: 1120 is November 2020
Current
|
4939X-P
Fully enclosed crate for export of two of 456 Series with NO GEK's. Heat treated and certified IPPC compliant. |
|
1-5-1
Idler Attachment to roll 1 to 5 gallon (20L) can on 456 or 1-5154 Series drum roller. Adjusts for can up to 18" (457mm) tall. |
|
CP-456-E3-230-50
Control Package for model 456-E3-50 Drum Roller. Explosion-Proof 3-Phase 230V 50Hz. Start/Stop Buttons. Consult electrician for wiring. |
|
|
CP-456-E3-400-50
Control Package for model 456-E3-50 Drum Roller. Explosion-Proof 3-Phase 400V 50Hz. Start/Stop Buttons. Consult electrician for wiring. |
|
GEK-456-E3
Kit: Enclosure with Safety Interlock for CUSTOMER to install with 456 Exp-Proof 3-Phase AC Drum Roller. SHIPS SEPARATELY W/ 2ND FREIGHT BILL |
| 2848Xi-P
Fully enclosed crate for export of 456 Series with NO GEK. Heat treated and certified IPPC compliant. |
|
| 4349-p
KIT, SEAL, 3" CYL, 648-P DF |
|
| 5516Xi-P
Fully enclosed crate for export of 456 with GEK (NOT set up). Crate is heat treated & certified IPPC compliant. |
|
| 6349-P
KIT, SEAL, 6318-P, 6319-P |
|
| FAT-456
OPTION: Complete Factory Acceptance Test form FFAT-456, and ship in literature packet with NEW 456 Series Drum Roller. |
|
|
POLY-456
OPTION: Factory Installed on NEW 456 Series to roll PLASTIC drum. 4 Extra wheels and end stop. CANNOT order without drum roller. |
California Proposition 65 Information
For more information go to www.P65Warnings.ca.gov
Popular Options
View all options
Kit: Enclosure with Safety Interlock for CUSTOMER to install with 456 Exp-Proof 3-Phase AC Drum Roller. SHIPS SEPARATELY W/ 2ND FREIGHT BILL
OPTION: Factory Installed on NEW 456 Series to roll PLASTIC drum. 4 Extra wheels and end stop. CANNOT order without drum roller.
Idler Attachment to roll 1 to 5 gallon (20L) can on 456 or 1-5154 Series drum roller. Adjusts for can up to 18" (457mm) tall.
Control Package for model 456-E3-50 Drum Roller. Explosion-Proof 3-Phase 230V 50Hz. Start/Stop Buttons. Consult electrician for wiring.
