Model 310-3-50
Tilt-To-Load Drum Tumbler. 3-Phase 230/400V 50Hz Motor. REQUIRES Controls to Start/Stop. CE REQUIRES Enclosure with Safety Interlock.
- Model 310-3 has 3-phase 230/400V 50Hz motor
- ONLY for country with 50Hz power supply
- Adjust drum rotation from 4 to 16 RPM
- REQUIRES Electric Control Box to Start / Stop Rotator
- Electric Control Package sold separately
- Model CP-310-3-230-50 for 3-phase 220V 50Hz power supply
- Model CP-310-3-400-50 for 3-phase 400V 50Hz power supply
- Guard Enclosure with Interlock sold separately as Kit GEK-310-3
- IMPORTANT: OSHA, CSA and EU require Enclosure with Safety Interlock
- Vigorous "Corner-Over-Corner" Drum Mixing
- Easy Floor-Level Loading of Upright Drum. Then Tilt Drum Holder Up for Mixing.
- Load upright drum...
- with drum truck
- with below-hook drum lifter and your hoist
- Mixing inside a closed drum reduces hazards and worker exposure
- Incorporate sediment and homogenize valuable ingredients
- Avoid messy cleanup of insertion mixers
- Mix contents of steel, plastic or fiber drum
- 29" to 37" (74 to 94 cm) tall
- 18" to 23.5" (46 to 60 cm) in diameter
- Typical 30 to 55 gallon (114 to 210 liter) size drum
|
CP-310-3-230-50
Control Package for model 310-3-50 Drum Tumbler. 3-Phase 230V 50Hz. Timer, Start/Stop, Emergency Stop, Lockable Fused Disconnect. |
|
|
CP-310-3-400-50
Control Package for model 310-3-50 Drum Tumbler. 3-Phase 400V 50Hz. Timer, Start/Stop, Emergency Stop, Lockable Fused Disconnect. |
|
GEK-310-3
Kit: Enclosure with Safety Interlock for CUSTOMER to install with 310 3-PH AC Tilt-To-Load Drum Tumbler. SHIPS SEPARATELY W/ 2nd FREIGHT BILL |
| 3212Xi-P
Fully enclosed crate for export of 310 Series with NO GEK. Heat treated and certified IPPC compliant. |
|
| 4963-P
KIT, SEAL, 2" CYL, 4572-P DF |
|
| 5014I-P
OPTION: Factory Installed Oil Cooler on NEW AC Powered 310 Series drum tumbler |
|
| 5480Xi-P
Fully enclosed crate for export of 310 Series with Enclosure Kit (NOT set up). Crate is heat treated and certified IPPC compliant. |
|
| 6589W-P
Top hold down bar for drum holder 5801-P used on 309, 310 and 311 Series Drum Tumblers. |
|
|
6637I-P
OPTION: Factory Installed cinch chain on drum holder 5801-p used on 309, 310 & 311 drum tumblers. Replaces ratchet web strap. |
| FAT-310
OPTION: Complete Factory Acceptance Test form FFAT-310, and ship in literature packet with NEW 310 Series Drum Tumbler. |
Optional Kit: Recommended Spare Parts for 310 Series with serial number 265843 to ______
4-digit serial numbers are simply the month & year of manufacture. Example: 1120 is November 2020
Specifications
| Drum RPM | 4 to 16 RPM
RPM is based on 22.5" (57.15 cm) diameter drum. |
| Full capacity | 800 Lb. (363.20 kg) |
| Half capacity | 400 Lb. (181.60 kg)
Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. |
WARNING – This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
| Phase | 3 |
| Power | 1.4914 kw |
| Style | (Totally enclosed fan cooled) |
| Explosion proof | No |
| Frequency | 50Hz |
| Voltage / Amp draw | 230v / 5.0 |
| Voltage / Amp draw | 400v / 2.9 |
| Ship length | 72" (182.88 cm) |
| Ship width | 42" (106.68 cm) |
| Ship height | 47" (119.38 cm) |
| Ship weight | 950 Lb. (431.30 kg) |
| Ship class | 150 |
Products
Company
Get in touch
Contact us Monday through Friday from 8:00 AM to 4:30PM
