310-E1
Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.
Tilt-To-Load Drum Tumbler / Drum Mixer turns drum "corner-over-corner" in one direction. LOAD UPRIGHT DRUM AT FLOOR LEVEL. Has Explosion Proof 1-phase 60Hz motor.
310-E1
- Model 310-E1 has explosion-proof single-phase 115/208/230V 60Hz motor
- Adjust drum rotation from 5 to 20 RPM
- REQUIRES Electric Control Box to Start / Stop Rotator
- Electric Control Package sold separately
- Model CP-310-E1-115 for 115V single-phase 60Hz power supply
- Model CP-310-E1-208 for 208V single-phase 60Hz power supply
- Model CP-310-E1-230 for 230V single-phase 60Hz power supply
- Guard Enclosure with Interlock sold separately as Kit GEK-310-E1
- IMPORTANT: OSHA, CSA and EU require Enclosure with Safety Interlock
- Mix inside closed drum to reduce hazards and worker exposure
- Incorporate sediment and homogenize valuable ingredients
- Avoid messy cleanup of insertion mixers
- Drum holder tilts down to floor level. Easy to load upright drum...
- with drum truck
- with below-hook drum lifter and your hoist
- Mix inside a closed steel, plastic or fiber drum
- 29" to 37" (74 to 94 cm) tall
- 18" to 23.5" (46 to 60 cm) in diameter
- Typical 30 to 55 gallon (114 to 210 liter) size drum
General
Drum RPM | 5 to 20 RPM RPM is based on 22.5" (57.15 cm) diameter drum. |
Full Capacity | 800 Lb. (363.2 kg) |
Half-full Capacity | 400 Lb. (181.6 kg) Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. |
Motor information
Phase | 1 |
HP | 2.00 |
Style | Explosion proof |
Explosion proof | Yes - Motor is not wired, consult a qualified electrician to complete wiring per local codes. |
Frequency | 60Hz |
Voltage / Amp draw | 115v / 21.0 |
Voltage / Amp draw | 208v / 11.5 |
Voltage / Amp draw | 230v / 10.5 |
Shipping dimensions
Ship length | 72" (182.88 cm) |
Ship width | 42" (106.68 cm) |
Ship height | 47" (119.38 cm) |
Ship weight | 1000 Lb. (454 kg) |
Ship class | 150 |
Example: 1120 is November 2020
Spec Sheet
Material Safety data sheet
Operators Manual
Operators Manual and Parts Diagram
Operators Manual and Parts Diagram
Operators Manual and Parts Diagram
Parts Diagram
Parts Diagram
Parts Diagram
Parts Diagram
Wiring Diagram
![]() |
3212X-P Fully Enclosed Crate for export of 1 of 310 Series. Crate is heat treated and certified IPPC compliant. |
![]() |
5480X-P Fully Enclosed Crate for export of 1 of 310 Series with Enclosure Kit (NOT set up). Crate is heat treated and certified IPPC compliant. |
![]() |
CP-310-E1-115 Control Package for model 310-E1 for use on Explosion-proof single-phase 115V 60Hz power supply. |
CP-310-E1-208 CONTROL PACKAGE FOR MODEL 310-E1, EXPLOSION-PROOF 1-PHASE 208V 60Hz. START/STOP BUTTONS. CONSULT ELECTRICAN FOR WIRING. |
|
![]() |
CP-310-E1-230 Control Package for model 310-E1 for use on explosion-proof single-phase 230V 60Hz power supply. |
![]() |
GEK-310-E1 Guard Enclosure Kit and Safety Interlock for customer to install with Morse Explosion-Proof single-phase AC 310 Series Drum Tumbler. |
4963-P 2" Cylinder Seal Kit, 4572-P DF |
|
5014I-P OPTION: Factory Installed Oil Cooler on NEW AC Powered 310 Series drum tumbler |
|
6589W-P Top hold down bar for drum holder 5801-p used on 309, 310 and 311 series drum tumblers. |
|
![]() |
6637I-P Factory Installed Cinch Chain OPTION |
FAT-310 OPTION: Complete Factory Acceptance Test form FFAT-310, and ship in literature packet with NEW 310 Series Drum Tumbler. |
California Proposition 65 Information

For more information go to www.P65Warnings.ca.gov