310-a


Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.

Tilt-To-Load Drum Tumbler. AIR Power Drum Mixer includes air controls and FRL. OSHA, CSA and CE REQUIRE Enclosure with Interlock.


310-a

Specific to model 310-a...
  • Model 310-A is AIR powered drum mixer
  • Includes AIR Controls, Filter, Regulator and Lubricator
  • Requires plant air at 50 PSI at a rate of 60 SCFM
  • Guard Enclosure with Interlock sold separately as Kit GEK-310-A
All 310 Series Tilt-To-Load Drum Tumblers...
  • IMPORTANT: OSHA, CSA and EU require Enclosure with Safety Interlock
  • Vigorous "Corner-Over-Corner" Drum Mixing
  • Easy Floor-Level Loading of Upright Drum. Then Tilt Drum Holder Up for Mixing.
  • Load upright drum...
    • with drum truck
    • with below-hook drum lifter and your hoist
  • Mixing inside a closed drum reduces hazards and worker exposure
  • Incorporate sediment and homogenize valuable ingredients
  • Avoid messy cleanup of insertion mixers
  • Mix contents of steel, plastic or fiber drum
    • 29" to 37" (74 to 94 cm) tall
    • 18" to 23.5" (46 to 60 cm) in diameter
    • Typical 30 to 55 gallon (114 to 210 liter) size drum
REQUEST QUOTE CLICK TO CALL

General

Drum RPM 5 to 12 RPM

RPM is based on 22.5" (57.15 cm) diameter drum.

Full Capacity

800 Lb. (363.20 kg)

Half-full Capacity 400 Lb. (181.60 kg)

Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum.

Shipping information

Ship length 72" (182.88 cm)
Ship width 42" (106.68 cm)
Ship height 47" (119.38 cm)
Ship weight 875 Lb. (397.25 kg)
Ship class 150
sticky note 4-digit serial numbers are simply the month & year of manufacture.
Example: 1120 is November 2020
Click serial range to download.
Operators Manual and Parts Diagram
Serial range

310 Series Tilt-To-Load Drum Tumbler

Hydraulic Power Pack

Tilt-To-Load Drum Tumbler
Parts Diagram
Serial range

Air Motor

Base Assembly

Drum Holder Assembly

Hydraulic Controls Assembly

Hydraulic Cylinder Assembly

Hydraulic Motor

Hydraulic Power Pack

Hydraulic Power Pack Assembly

Hydraulic Tilt Cylinder

Safety Limit Valve Assembly

Tilt Assembly
Operators Manual
Serial range

Air Motor

Air Motor Technical Information

CE Declaration of Conformity - 310 AIR Powered

Grease for Pillow Block Bearing

Hydraulic Power Pack

Tilt-To-Load Drum Tumbler
GEK-310-A thumbnail image GEK-310-A

Kit: Enclosure with Safety Interlock for CUSTOMER to install with 310-A AIR Power Tilt-To-Load Drum Tumbler. SHIPS SEPARATELY W/ 2ND FREIGHT BILL

3212Xi-P

Fully enclosed crate for export of 310 Series with NO GEK. Heat treated and certified IPPC compliant.

4963-P

KIT, SEAL, 2" CYL, 4572-P DF

5480Xi-P

Fully enclosed crate for export of 310 Series with Enclosure Kit (NOT set up). Crate is heat treated and certified IPPC compliant.

6589W-P

Top hold down bar for drum holder 5801-P used on 309, 310 and 311 Series Drum Tumblers.

6637I-P thumbnail image 6637I-P

OPTION: Factory Installed cinch chain on drum holder 5801-p used on 309, 310 & 311 drum tumblers. Replaces ratchet web strap.

FAT-310

OPTION: Complete Factory Acceptance Test form FFAT-310, and ship in literature packet with NEW 310 Series Drum Tumbler.

k208-p

AIR MOTOR SERVICE KIT FOR 290-A-2P

California Proposition 65 Information


...
WARNING: This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm.

For more information go to www.P65Warnings.ca.gov
QUICK QUOTE