310-e1-50
Morse Tilt-To-Load Drum Rotator tumbles a drum "corner-over-corner" for vigorous mixing of drum contents.
310
310 Tilt-To-Load Drum Tumblers
Plastic barrel agitator turns a drum end-over-end to remix stratified or settled contents
Tumble a fiber drum end-over-end to mix the contents.
Quickly load an upright drum onto the base plate of the Tilt-To-Load Drum Rotator at floor level with Drum Truck model 152
Or load with a below-hook drum lifter and your hoist or crane.
Secure drum in holder with two top clamps and web strap around drum
The drum holder accepts 30 to 55 gallon (114 to 210 liter) size steel, plastic or fiber drum. It has base plate under drum, two top clamps, and web strap around drum.
All Drum Rotators should be installed with Enclosure and Safety Interlock
Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.
Tilt-To-Load Drum Tumbler. Exp-Proof 1-Phase 220V 50Hz Motor. REQUIRES Controls to Start/Stop. CE REQUIRES Enclosure with Safety Interlock.
310-e1-50
- Model 310-E1-50 has explosion-proof single-phase 220V 50Hz motor
- ONLY for country with 50Hz power supply
- Adjust drum rotation from 4 to 16 RPM
- REQUIRES Electric Control Box to Start / Stop Rotator
- Electric Control Package sold separately
- Model CP-310-E1-220-50 for 220V single-phase 50Hz power supply
- Guard Enclosure with Interlock sold separately as Kit GEK-310-E1-50
- IMPORTANT: OSHA, CSA and EU require Enclosure with Safety Interlock
- Vigorous "Corner-Over-Corner" Drum Mixing
- Easy Floor-Level Loading of Upright Drum. Then Tilt Drum Holder Up for Mixing.
- Load upright drum...
- with drum truck
- with below-hook drum lifter and your hoist
- Mixing inside a closed drum reduces hazards and worker exposure
- Incorporate sediment and homogenize valuable ingredients
- Avoid messy cleanup of insertion mixers
- Mix contents of steel, plastic or fiber drum
- 29" to 37" (74 to 94 cm) tall
- 18" to 23.5" (46 to 60 cm) in diameter
- Typical 30 to 55 gallon (114 to 210 liter) size drum
General
| Drum RPM | 4 to 16 RPM
RPM is based on 22.5" (57.15 cm) diameter drum. |
| Full Capacity | 800 Lb. (363.20 kg) |
| Half-full Capacity | 400 Lb. (181.60 kg)
Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. |
Motor information
| Phase | 1 |
| HP | 2.00 |
| Style | Explosion proof |
| Explosion proof | Yes - Motor is not wired, consult a qualified electrician to complete wiring per local codes. |
| Frequency | 50Hz |
| Voltage / Amp draw | 220v / 9.8 |
Shipping information
| Ship length | 72" (182.88 cm) |
| Ship width | 42" (106.68 cm) |
| Ship height | 47" (119.38 cm) |
| Ship weight | 1000 Lb. (454.00 kg) |
| Ship class | 150 |
4-digit serial numbers are simply the month & year of manufacture. Example: 1120 is November 2020
|
CP-310-E1-220-50
Control Package for model 310-E1-50 Drum Tumbler. Explosion-Proof 1-PH 220V 50Hz. Start/Stop Buttons. CONSULT ELECTRICAN FOR WIRING. |
|
GEK-310-E1
Kit: Enclosure with safety Interlock for CUSTOMER to install with 310 Exp-Proof 1-PH Tilt-To-Load Tumbler. SHIPS SEPARATELY W/ 2ND FREIGHT BILL |
| 3212Xi-P
Fully enclosed crate for export of 310 Series with NO GEK. Heat treated and certified IPPC compliant. |
|
| 4963-P
KIT, SEAL, 2" CYL, 4572-P DF |
|
| 5014I-P
OPTION: Factory Installed Oil Cooler on NEW AC Powered 310 Series drum tumbler |
|
| 5480Xi-P
Fully enclosed crate for export of 310 Series with Enclosure Kit (NOT set up). Crate is heat treated and certified IPPC compliant. |
|
| 6589W-P
Top hold down bar for drum holder 5801-P used on 309, 310 and 311 Series Drum Tumblers. |
|
|
6637I-P
OPTION: Factory Installed cinch chain on drum holder 5801-p used on 309, 310 & 311 drum tumblers. Replaces ratchet web strap. |
| FAT-310
OPTION: Complete Factory Acceptance Test form FFAT-310, and ship in literature packet with NEW 310 Series Drum Tumbler. |
California Proposition 65 Information
For more information go to www.P65Warnings.ca.gov
Popular Options
View all options
Kit: Enclosure with safety Interlock for CUSTOMER to install with 310 Exp-Proof 1-PH Tilt-To-Load Tumbler. SHIPS SEPARATELY W/ 2ND FREIGHT BILL
KIT, SEAL, 2" CYL, 4572-P DF
OPTION: Complete Factory Acceptance Test form FFAT-310, and ship in literature packet with NEW 310 Series Drum Tumbler.
OPTION: Factory Installed Oil Cooler on NEW AC Powered 310 Series drum tumbler
Recomended Spare Parts Kits
Optional Kit: Recommended Spare Parts for 310 Series with serial number 265843 to ______