400A-96-121
Model 400A-72-120. Hydra-Lift drum carrier with Electric Power Drum Lift and Manual Pull Chain Drum Tilt Control.
400
400 Series Hydra-Lift Karriers
Drum Lift and Lower Controls. Electrician to install switch, cord and plug according to local codes.
Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.
Hydra-Lift Karrier, 96" Maximum Pour Height. AC Power lift. Ex-proof 1-PH 60Hz motor. Pull chain tilt. NO switch, cord, plug. 800 Lb. capacity.
400A-96-121
- Model 400A-96-121 has 60Hz Electric power drum lift with single-phase explosion-proof motor, but Pull Chain drum tilt control
- Ships WITHOUT switch, cord and plug. Electrician to install according to local codes.
- Dispense drum at up to 96" (244 cm) high
- We recommend the
MORStopTM Tilt-Brake Option to automatically lock drum tilt angle, until the operator turns it
Hydra-Lift Karriers Lift, Move and Dispense a drum- Rotate drum 360 degrees forward and back to dispense into vat, hopper, mixer or other container
- MORCINCHTM Drum Handling System
- Drum Holder Automatically adjusts for 22" to 23.5" (56 to 59.7 cm) diameter drum
- Install correct MORCINCHTM Kit to handle plastic or fiber drum
- Insert correct size Diameter Adapter for each smaller drum
General
| Full Capacity | 800 Lb. (363.20 kg) |
| Half-full Capacity | 500 Lb. (227.00 kg)
Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. |
| Dispense height | 96.0" (243.84 cm) |
| Lift style | Power lift |
| Tilt style | Manual tilt |
Motor information
| Phase | 1 |
| HP | 1.00 |
| Style | Explosion proof |
| Explosion proof | Yes - Motor is not wired, consult a qualified electrician to complete wiring per local codes. |
| Frequency | 60Hz |
| Voltage / Amp draw | 115v / 12.4 |
| Voltage / Amp draw | 230v / 6.2 |
Shipping information
| Ship length | 79" (200.66 cm) |
| Ship width | 52" (132.08 cm) |
| Ship height | 74" (187.96 cm) |
| Ship weight | 456 Lb. (207.02 kg) |
| Ship class | 150 |
4-digit serial numbers are simply the month & year of manufacture. Example: 1120 is November 2020
|
55/30-14.5
Diameter Adapter for 14"-14.5" (35.6 -36.8 cm) drum. Integrated brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
55/30-16
Diameter Adapter for 15.5"-16" (39.4 -40.6 cm) drum. Integrated brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
55/30-17.5
Diameter Adapter for 17"-17.5" (43.2 -44.5 cm) drum. Integrated brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
55/30-19
Diameter Adapter for 18.5"-19" (47-48.3 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
55/30-19B
Diameter Adapter for 18.5"-19" drum. Includes brackets for poly and fiber drum. IMPORTANT: Measure outside diameter 1/2-way down drum. |
|
|
55/30-20.5
Diameter Adapter for 20"-20.5" (50.8-52.1 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
55/30-22
Diameter Adapter for 21.5-22" (54.6-55.9 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
3900I-P
OPTION: Factory Installed MORStop Tilt-Brake on NEW manual tilt model. Auto holds drum tilt angle until you move it. |
|
4556-P
KIT: MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust for 31"-39" tall drum. NOT a complete drum handler. |
|
X02-400-96
OPTION: Factory Installed 9" hand crank on NEW 400A-96 Series. Replaces pull chain drum tilt control. |
|
X03-400-96
OPTION: Factory Installed 16" diameter hand wheel on NEW 400A-96, 520 or 525 Series. Replaces pull chain drum tilt control. |
|
55/30-32G
Diameter Adapter for 32-gallon Rubbermaid Brute model 2632 |
|
|
55/30-44G
Diameter Adapter for 44-gallon Rubbermaid Brute model 2643 |
| 1111i-p
option, factory installed auxiliary valve. Allows metering the lowering of the lift cylinder. Can be closed for postive hold. |
|
|
2386I-P
OPTION: Factory Installed Step Down Floor Lock on NEW 400 or 405 Series |
| 2843Xi-P
Fully enclosed crate for export of 400A-96 or 405 Series. Crate is heat treated and certified IPPC compliant. |
|
|
4556C-P
Kit: Bracket for use with Drum Cone attached attached to drum. Prevents drum from slipping length-ways. Adjust for 30"-38" (76.2-96.5 cm) tall drum. |
|
4560B-P
KIT: MORCINCH Top Rim Clamp to prevent a RIMMED plastic or fiber drum from slipping. Adjust for RIMMED 30 to 55 gallon drum. |
| 4904I-P
OPTION: Factory Installed 1/4" Thick Neoprene Liner on NEW 5000-P MORCINCH drum holder |
|
|
5115I-P
OPTION: Factory installed 2"x3' Web Strap and Ratchet on NEW MORCINCH Drum Holder. Replaces cinch chain. NOT for spark resistant model. |
| 6388-P
Adapter for use with 4556-P Bracket Assembly in order to handle 55 gallon Rubbermaid Brute 2655 |
|
| 6659-P
SEAL KIT FOR 1-1/2" CLYINDER |
|
| FGO
OPTION: Factory Installed 1-Gallon of Food Grade Hydraulic Oil |
|
|
G-400
OPTION: Factory Installed 3-piece drum holder on NEW 400 or 500 Series drum handler |
| LTC4
Load test one unit at Morse factory and ship with Load Test Certificate. NOT for Below-Hook model. |
|
| SCW-400
OPTION: Factory Installed static conductive wheels and casters on NEW 400 Series. Have conductive rubber tread. |
California Proposition 65 Information
For more information go to www.P65Warnings.ca.gov
Popular Options
View all options
KIT: MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust for 31"-39" tall drum. NOT a complete drum handler.
KIT: MORCINCH Top Rim Clamp to prevent a RIMMED plastic or fiber drum from slipping. Adjust for RIMMED 30 to 55 gallon drum.
OPTION: Factory Installed MORStop Tilt-Brake on NEW manual tilt model. Auto holds drum tilt angle until you move it.
Diameter Adapter for 18.5"-19" (47-48.3 cm) diameter drum. Measure diameter 1/2-way down drum.