515-N-120
Weigh a drum while Pouring. Model 515-N-114 shown.
Scale-Equipped Vertical-Lift Drum Pourer - Model 515-N-114 shown
Secure drum with cinch chain and ratchet - Model 515-N-114 shown
Drum Lift and Lower Controls
Lift drum to dispensing height - Model 515-N-114 shown
Dispense drum at up to 60" (152 cm) high - Model 515-N-114 shown
Model 515-N-114 shown pouring a 55-gallon (210 liter) steel drum
Weigh the drum while you pour
Displays drum weight
Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.
Scale-Equipped Vertical-Lift 55-Gal. Drum Pourer. Weigh while pouring up 60" high. 1-Phase 115V 60Hz power drum lift. Hand crank drum tilt.
515-N-120
- Model 515-N-120 has 1 HP single-phase 115V 60Hz AC motor for power drum lift, and hand crank manual drum tilt
- Hold momentary switch to raise drum
- Hand Crank controlled drum tilt
- Manual release valve lowers drum
- Dispense drum up to 60" (152 cm) high
- NOT for use in hazardous areas
- We recommend the MORStopTM Tilt-Brake Option to automatically lock drum tilt angle
- Mobile Scale-Equipped Drum Handler to Lift, Weigh, Transport and Dispense a drum
- Weigh drum as you pour to dispense exact amount needed
- Accuracy of +/- 0.2% of displayed weight
- Rotate drum 360 degrees forward and back to dispense into vat, hopper, mixer or other container
- MORCINCHTM Drum Handling System
- Automatically adjusts for 22" to 23.5" (56 to 59.7 cm) diameter drum
- Install correct MORCINCHTM Kit to handle plastic or fiber drum
- Insert correct size Diameter Adapter for each smaller drum
General
| Full Capacity | 800 Lb. (363.20 kg) |
| Half-full Capacity | 500 Lb. (227.00 kg)
Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. |
| Dispense height | 60.0" (152.40 cm) |
| Lift style | Power lift |
| Tilt style | Manual tilt |
Motor information
| Phase | 1 |
| HP | 1.00 |
| Style | TEFC (Totally enclosed fan cooled) |
| Explosion proof | No |
| Frequency | 60Hz |
| Voltage / Amp draw | 115v / 11.8 |
Shipping information
| Ship length | 72" (182.88 cm) |
| Ship width | 43" (109.22 cm) |
| Ship height | 82" (208.28 cm) |
| Ship weight | 786 Lb. (356.84 kg) |
| Ship class | 150 |
4-digit serial numbers are simply the month & year of manufacture. Example: 1120 is November 2020
|
55/30-14.5
Diameter Adapter for 14"-14.5" (35.6 -36.8 cm) drum. Integrated brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
55/30-16
Diameter Adapter for 15.5"-16" (39.4 -40.6 cm) drum. Integrated brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
55/30-17.5
Diameter Adapter for 17"-17.5" (43.2 -44.5 cm) drum. Integrated brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
55/30-19
Diameter Adapter for 18.5"-19" (47-48.3 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
55/30-19B
Diameter Adapter for 18.5"-19" drum. Includes brackets for poly and fiber drum. IMPORTANT: Measure outside diameter 1/2-way down drum. |
|
|
55/30-20.5
Diameter Adapter for 20"-20.5" (50.8-52.1 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
55/30-22
Diameter Adapter for 21.5-22" (54.6-55.9 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
3900I-P
OPTION: Factory Installed MORStop Tilt-Brake on NEW manual tilt model. Auto holds drum tilt angle until you move it. |
|
4556-P
KIT: MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust for 31"-39" tall drum. NOT a complete drum handler. |
|
X03-400-60
OPTION: Factory Installed 16" diameter hand wheel on NEW 82A-GT, 400A-60, 510 or 515 Series. Replaces hand crank drum tilt control. |
|
55/30-32G
Diameter Adapter for 32-gallon Rubbermaid Brute model 2632 |
|
|
55/30-44G
Diameter Adapter for 44-gallon Rubbermaid Brute model 2643 |
| 1111i-p
option, factory installed auxiliary valve. Allows metering the lowering of the lift cylinder. Can be closed for postive hold. |
|
| 2993i-P
Replace 8" dia. front wheels with 5" dia. front wheels. |
|
| 4173Xi-P
Fully enclosed crate for export of 515, 525, 611 or 620 Series. Crate is heat treated and certified IPPC compliant. |
|
|
4556C-P
Kit: Bracket for use with Drum Cone attached attached to drum. Prevents drum from slipping length-ways. Adjust for 30"-38" (76.2-96.5 cm) tall drum. |
|
4560B-P
KIT: MORCINCH Top Rim Clamp to prevent a RIMMED plastic or fiber drum from slipping. Adjust for RIMMED 30 to 55 gallon drum. |
| 4904I-P
OPTION: Factory Installed 1/4" Thick Neoprene Liner on NEW 5000-P MORCINCH drum holder |
|
|
5115I-P
OPTION: Factory installed 2"x3' Web Strap and Ratchet on NEW MORCINCH Drum Holder. Replaces cinch chain. NOT for spark resistant model. |
| 6388-P
Adapter for use with 4556-P Bracket Assembly in order to handle 55 gallon Rubbermaid Brute 2655 |
|
| 6659-P
SEAL KIT FOR 1-1/2" CLYINDER |
|
| FGO
OPTION: Factory Installed 1-Gallon of Food Grade Hydraulic Oil |
|
|
G-400
OPTION: Factory Installed 3-piece drum holder on NEW 400 or 500 Series drum handler |
| LTC4
Load test one unit at Morse factory and ship with Load Test Certificate. NOT for Below-Hook model. |
|
| SCW-500
OPTION: Factory Installed static conductive wheels and casters on NEW 500 Series, Have conductive rubber tread. |
California Proposition 65 Information
For more information go to www.P65Warnings.ca.gov
Popular Options
View all options
KIT: MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust for 31"-39" tall drum. NOT a complete drum handler.
KIT: MORCINCH Top Rim Clamp to prevent a RIMMED plastic or fiber drum from slipping. Adjust for RIMMED 30 to 55 gallon drum.
OPTION: Factory Installed MORStop Tilt-Brake on NEW manual tilt model. Auto holds drum tilt angle until you move it.
Diameter Adapter for 18.5"-19" (47-48.3 cm) diameter drum. Measure diameter 1/2-way down drum.