400A-96SS-121
Model 400A-96SS-125 shown - Stainless Steel Hydra-Lift Drum Carrier with battery power drum lift and pull chain drum tilt.
Drum Lift and Lower Controls. Electrician to install switch, cord and plug according to local codes.
Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.
Stainless Steel Hydra-Lift Karrier. 96"(244cm) pour height.AC Power lift Exp-Proof 1-PH 60Hz motor.Pull chain tilt. Welds NOT ground or polished.
400A-96SS-121
- Model 400A-96SS-121 has frame made of bead blast finished type 304 stainless steel
- Welds are NOT ground smooth or polished
- Some parts are NOT stainless, such as ratchet, pawl, chain wheel, pull chain, wheels, motor and hydraulics
- Gears and sprockets are NOT stainless, but are covered with guards
- Has Electric power drum lift with explosion-proof single-phase 60Hz motor, but Pull Chain drum tilt control
- Ships WITHOUT switch, cord and plug. Electrician to install according to local codes.
- Dispense drum up to 96" (244 cm) high
- NOT for use in hazardous areas
- We recommend the
MORStopTM Tilt-Brake Option to automatically lock drum tilt angle, until the operator turns it
Hydra-Lift Karriers Lift, Move and Dispense a drum- Rotate drum 360 degrees forward and back to dispense into vat, hopper, mixer or other container
- MORCINCHTM Drum Handling System
- Drum Holder Automatically adjusts for 22" to 23.5" (56 to 59.7 cm) diameter drum
- Install correct MORCINCHTM Kit to handle plastic or fiber drum
- Insert correct size Diameter Adapter for each smaller drum
General
| Full Capacity | 800 Lb. (363.20 kg) |
| Half-full Capacity | 500 Lb. (227.00 kg)
Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. |
| Dispense height | 96.0" (243.84 cm) |
| Lift style | Power lift |
| Tilt style | Manual tilt |
Motor information
| Phase | 1 |
| HP | 1.00 |
| Style | Explosion proof |
| Explosion proof | Yes - Motor is not wired, consult a qualified electrician to complete wiring per local codes. |
| Frequency | 60Hz |
| Voltage / Amp draw | 115v / 12.4 |
| Voltage / Amp draw | 230v / 6.2 |
Shipping information
| Ship length | 79" (200.66 cm) |
| Ship width | 52" (132.08 cm) |
| Ship height | 74" (187.96 cm) |
| Ship weight | 456 Lb. (207.02 kg) |
| Ship class | 150 |
4-digit serial numbers are simply the month & year of manufacture. Example: 1120 is November 2020
|
55/30SS-14.5
Stainless Steel Adapter for 14-14.5" (35.6-36.8 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
|
55/30SS-16
Stainless Steel Adapter for 15.5-16" (39.4-40.6 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
|
55/30SS-17.5
Stainless Steel Adapter for 17-17.5" (43.2-44.5 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
55/30SS-19
Stainless Steel Adapter for 18.5" to 19" (47 to 48.3 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
55/30SS-20.5
Stainless Steel Adapter for 20" to 20.5" (50.8 to 52.1 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
55/30SS-22
Stainless Steel Adapter for 21.5" to 22" (54.6 to 55.9 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
X02-400-96SS
OPTION: Factory Installed 9" stainless steel hand crank on NEW 400A-96SS Series. Replaces pull chain drum tilt control. |
|
X03-400-96SS
OPTION: Factory Installed 16" diameter stainless steel hand wheel on NEW 400A-96SS Series. Replaces pull chain drum tilt control. |
| 55/30SS-19B
Stainless Steel Diameter Adapter for 18.5"-19" Drum. Integrated brackets adjust to 38" tall drum. **Measure outside diameter 1/2-way down drum. |
|
|
55/30SS-32G
Stainless Steel Diameter Adapter for 32-gallon Rubbermaid Brute model 2632 |
|
|
55/30SS-44G
Stainless Steel Diameter Adapter for 44-gallon Rubbermaid Brute model 2643 |
| 1111i-p
option, factory installed auxiliary valve. Allows metering the lowering of the lift cylinder. Can be closed for postive hold. |
|
| 2843Xi-P
Fully enclosed crate for export of 400A-96 or 405 Series. Crate is heat treated and certified IPPC compliant. |
|
| 3006SSI-P
Option: factory installed stainless steel hydraulic cylinder, 1.5" x 29", on new 400A-96SS, 510SS OR 515SS series. |
|
|
3900SSI-P
OPTION: Factory Installed Stainless Steel MORStop Tilt-Brake on NEW manual tilt drum handler. Auto holds drum tilt angle until you move it. |
|
4556SS-P
Kit:Stainless Steel MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust to 31-39" tall drum. NOT complete drum handler |
|
4560BSS-P
KIT: Stainless steel MORCINCH Top Rim Clamp to prevent a RIMMED plastic or fiber drum from slipping. Adjust for RIMMED 30-55 gallon drum. |
|
5115ssi-p
OPTION: Factory installed 2" x 3' Web Strap and Stainless Steel Ratchet on NEW MORCINCH Drum Holder. Replaces cinch chain around drum. |
| 5597SSI-P
OPTION: Factory installed stainless steel ratchet and pawl on NEW stainless steel MORCINCH drum holder |
|
| 6388SS-P
STAINLESS STEEL ADAPTOR FOR USE WITH 4556SS-P BRACKET ASSEMBLY IN ORDER TO HANDLE 55 GALLON RUBBERMAID MODEL 2655 |
|
| 6659-P
SEAL KIT FOR 1-1/2" CLYINDER |
|
| FGO
OPTION: Factory Installed 1-Gallon of Food Grade Hydraulic Oil |
|
| LTC4
Load test one unit at Morse factory and ship with Load Test Certificate. NOT for Below-Hook model. |
California Proposition 65 Information
For more information go to www.P65Warnings.ca.gov
Popular Options
View all options
Kit:Stainless Steel MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust to 31-39" tall drum. NOT complete drum handler
Stainless Steel Adapter for 18.5" to 19" (47 to 48.3 cm) diameter drum. Measure diameter 1/2-way down drum.
OPTION: Factory Installed Stainless Steel MORStop Tilt-Brake on NEW manual tilt drum handler. Auto holds drum tilt angle until you move it.
Stainless Steel Adapter for 20" to 20.5" (50.8 to 52.1 cm) diameter drum. Measure diameter 1/2-way down drum.