456-3-575
Morse Hydra-Lift Drum Rotators roll a drum on its side to mix drum contents
456
456 Hydra-lift Drum Rollers
Hydra-Lift Drum Roller can be loaded with a drum truck.
Hydra-Lift Drum Roller can be loaded with your crane or hoist and a below-hook drum lifter.
Hydra-Lift Drum Rotators have hydraulic power tilt control to raise drum from upright and lay it down in rolling position.
Close the Enclosure to engage interlock. Then tilt over to horizontal drum rolling position.
Enclosure with safety interlock automatically shuts off the drum tumbler when the door is opened.
Option # POLY-456 Roll your 55-gallon plastic drum on a Hydra-Lift Drum Roller, adds extra wheels and an end stop to prevent your drum from traveling lengthways during rolling.
Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.
Hydra-Lift Drum Roller. 3-Phase 575V 60Hz Motor. REQUIRES Electric Controls to Start/Stop. OSHA REQUIRES Enclosure w/ Interlock
456-3-575
- Model 456-3-575 is 3-phase 575V 60Hz electric
- Adjust drum rotation from speed
- REQUIRES Electric Control Box to Start / Stop Rotator
- Electric Control Package sold separately
- Model CP-456-3-575 for 3-phase 575V 60Hz power supply
- Guard Enclosure Kit sold separately as Kit GEK-456-3
- IMPORTANT: OSHA, CSA and EU require enclosure with safety interlock
- Load upright drum at floor level with drum truck, or with below-hook drum lifter and your crane
- Hydraulic Power-Tilt drum over onto roller wheels
- Roll STEEL drum with 6" to 26" (15 to 66 cm) diameter, and maximum 40" (102 cm) length
- To roll a PLASTIC drum, add Option POLY-456
- To roll 1-to-5 gallon cylindrical can, install Idler Attachment 1-5-1
- Maximum ambient operating temperature: 130°F (54°C)
General
| Drum RPM | 5 to 17 RPM RPM is based on 22.5" (57.15 cm) diameter drum. |
| Liquid Capacity | 1000 Lb. (454 kg) |
| Dryload Capacity | 400 Lb. (181.6 kg) A shifting dry load exerts greater stress on the drum rotator than the fluid motion of a liquid load. |
Motor information
| Phase | 3 |
| HP | 1.00 |
| Style | TEFC (Totally enclosed fan cooled) |
| Explosion proof | No |
| Frequency | 60Hz |
| Voltage / Amp draw | 575v / 1.2 |
Shipping information
| Ship length | 72" (182.88 cm) |
| Ship width | 42" (106.68 cm) |
| Ship height | 46" (116.84 cm) |
| Ship weight | 630 Lb. (286.02 kg) |
| Ship class | 70 |
4-digit serial numbers are simply the month & year of manufacture. Example: 1120 is November 2020
 |
2848X-P Fully Enclosed Crate for export of 1 of 456 Series. Crate is heat treated and certified IPPC compliant. |
|
4939X-P Fully Enclosed Crate for export of 2 of 456 Series. Crate is heat treated and certified IPPC compliant. |
|
5516X-P Fully enclosed crate for export of 456 or 1-5154 Series with Enclosure Kit (NOT set up). Crate is heat treated & certified IPPC compliant. |
 |
1-5-1 Idler attachment to roll a 1 to 5 gallon can on a Morse 5154 or 456 Series 55-gallon drum roller |
 |
CP-456-3-575 Control Package for model 456-3-575 for use on 3-phase 575V 60Hz power supply |
 |
GEK-456-3 Guard Enclosure Kit and Safety Interlock for customer to install with Morse 3-phase AC 456 Series Hydra-Lift Drum Roller. |
| 4349-p KIT, SEAL, 3" CYL, 648-P DF |
|
| 6349-P KIT, SEAL, 6318-P, 6319-P |
|
| FAT-456 OPTION: Complete Factory Acceptance Test form FFAT-456, and ship in literature packet with NEW 456 Series Drum Roller. |
|
 |
POLY-456 OPTION: Factory Installed on NEW 456 Series to roll PLASTIC drum. Includes 4 Extra wheels and end stop to prevent drum travel. CANNOT order without drum roller. |
California Proposition 65 Information
For more information go to www.P65Warnings.ca.gov
Popular Options
View all options
Idler attachment to roll a 1 to 5 gallon can on a Morse 5154 or 456 Series 55-gallon drum roller
OPTION: Factory Installed on NEW 456 Series to roll PLASTIC drum. Includes 4 Extra wheels and end stop to prevent drum travel. CANNOT order without drum roller.
Guard Enclosure Kit and Safety Interlock for customer to install with Morse 3-phase AC 456 Series Hydra-Lift Drum Roller.
Control Package for model 456-3-575 for use on 3-phase 575V 60Hz power supply
