525-N-120
Scale-Equipped Vertical-Lift Drum Pourer to weigh drum while pouring at up 106" high
Drum Lift and Lower Controls
Pull Chain drum tilt control
Weigh the drum while you pour
Displays drum weight
Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.
Scale-Equipped Vertical-Lift 55-Gal. Drum Pourer. Weigh while pouring up to 106" high. 1-Phase 115V 60Hz power drum. Pull chain drum tilt.
525-N-120
- Model 525-N-120 has 1 HP single-phase 115V 60Hz AC motor for power drum lift, and pull chain manual drum tilt
- Hold momentary switch to raise drum
- Pull Chain controlled drum tilt
- Manual release valve lowers drum
- Dispense drum at up to 106" (269 cm) high
- NOT for use in hazardous areas
- We recommend the MORStopTM Tilt-Brake Option to automatically lock drum tilt angle
- Mobile Scale-Equipped Drum Handler to Lift, Weigh, Transport and Dispense a drum
- Weigh drum as you pour to dispense exact amount needed
- Accuracy of +/- 0.2% of displayed weight
- Rotate drum 360 degrees forward and back to dispense into vat, hopper, mixer or other container
- MORCINCHTM Drum Handling System
- Automatically adjusts for 22" to 23.5" (56 to 59.7 cm) diameter drum
- Install correct MORCINCHTM Kit to handle plastic or fiber drum
- Insert correct size Diameter Adapter for each smaller drum
General
| Full Capacity | 800 Lb. (363.20 kg) |
| Half-full Capacity | 500 Lb. (227.00 kg)
Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. |
| Dispense height | 106.0" (269.24 cm) |
| Lift style | Power lift |
| Tilt style | Manual tilt |
Motor information
| Phase | 1 |
| HP | 1.00 |
| Style | TEFC (Totally enclosed fan cooled) |
| Explosion proof | No |
| Frequency | 60Hz |
| Voltage / Amp draw | 115v / 11.8 |
Shipping information
| Ship length | 78" (198.12 cm) |
| Ship width | 48" (121.92 cm) |
| Ship height | 83" (210.82 cm) |
| Ship weight | 931 Lb. (422.67 kg) |
| Ship class | 150 |
4-digit serial numbers are simply the month & year of manufacture. Example: 1120 is November 2020
|
55/30-14.5
Diameter Adapter for 14"-14.5" (35.6 -36.8 cm) drum. Integrated brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
55/30-16
Diameter Adapter for 15.5"-16" (39.4 -40.6 cm) drum. Integrated brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
55/30-17.5
Diameter Adapter for 17"-17.5" (43.2 -44.5 cm) drum. Integrated brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
55/30-19
Diameter Adapter for 18.5"-19" (47-48.3 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
55/30-19B
Diameter Adapter for 18.5"-19" drum. Includes brackets for poly and fiber drum. IMPORTANT: Measure outside diameter 1/2-way down drum. |
|
|
55/30-20.5
Diameter Adapter for 20"-20.5" (50.8-52.1 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
55/30-22
Diameter Adapter for 21.5-22" (54.6-55.9 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
3900I-P
OPTION: Factory Installed MORStop Tilt-Brake on NEW manual tilt model. Auto holds drum tilt angle until you move it. |
|
4556-P
KIT: MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust for 31"-39" tall drum. NOT a complete drum handler. |
|
X03-400-96
OPTION: Factory Installed 16" diameter hand wheel on NEW 400A-96, 520 or 525 Series. Replaces pull chain drum tilt control. |
|
55/30-32G
Diameter Adapter for 32-gallon Rubbermaid Brute model 2632 |
|
|
55/30-44G
Diameter Adapter for 44-gallon Rubbermaid Brute model 2643 |
| 1111i-p
option, factory installed auxiliary valve. Allows metering the lowering of the lift cylinder. Can be closed for postive hold. |
|
| 2993i-P
Replace 8" dia. front wheels with 5" dia. front wheels. |
|
| 4173Xi-P
Fully enclosed crate for export of 515, 525, 611 or 620 Series. Crate is heat treated and certified IPPC compliant. |
|
|
4556C-P
Kit: Bracket for use with Drum Cone attached attached to drum. Prevents drum from slipping length-ways. Adjust for 30"-38" (76.2-96.5 cm) tall drum. |
|
4560B-P
KIT: MORCINCH Top Rim Clamp to prevent a RIMMED plastic or fiber drum from slipping. Adjust for RIMMED 30 to 55 gallon drum. |
| 4904I-P
OPTION: Factory Installed 1/4" Thick Neoprene Liner on NEW 5000-P MORCINCH drum holder |
|
|
5115I-P
OPTION: Factory installed 2"x3' Web Strap and Ratchet on NEW MORCINCH Drum Holder. Replaces cinch chain. NOT for spark resistant model. |
| 6388-P
Adapter for use with 4556-P Bracket Assembly in order to handle 55 gallon Rubbermaid Brute 2655 |
|
| 6659-P
SEAL KIT FOR 1-1/2" CLYINDER |
|
| FGO
OPTION: Factory Installed 1-Gallon of Food Grade Hydraulic Oil |
|
|
G-400
OPTION: Factory Installed 3-piece drum holder on NEW 400 or 500 Series drum handler |
| SCW-500
OPTION: Factory Installed static conductive wheels and casters on NEW 500 Series, Have conductive rubber tread. |
California Proposition 65 Information
For more information go to www.P65Warnings.ca.gov
Popular Options
View all options
KIT: MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust for 31"-39" tall drum. NOT a complete drum handler.
KIT: MORCINCH Top Rim Clamp to prevent a RIMMED plastic or fiber drum from slipping. Adjust for RIMMED 30 to 55 gallon drum.
OPTION: Factory Installed MORStop Tilt-Brake on NEW manual tilt model. Auto holds drum tilt angle until you move it.
Diameter Adapter for 18.5"-19" (47-48.3 cm) diameter drum. Measure diameter 1/2-way down drum.