Model 515SS-T-114
Stainless Steel Intrinsically-Safe Scale-Equipped Vertical-Lift Drum Pourer 60". AIR Power lift and tilt. Welds are NOT ground or polished.
- Model 515SS-T-114 has AIR power drum lift and tilt
- On/Off valve and Lift valve raise drum
- Second valve controls hydraulically-driven drum tilt
- Manual release valve lowers drum
- Frame is made of type 304 Stainless Steel with bead blast finish. Welds are NOT ground smooth or polished.
- Dispense at up to 60" (152 cm) high
- T-Type Scale: Intrinsically-Safe Electronics Ultra Low Power Intensity (ULPI) Instrument for use in many hazardous areas, approved for all classes, groups and divisions of N.E.C. hazardous environment classifications.
- Charger for scale battery is NOT for use in hazard area. Recharge outside hazard area.
- Mobile Scale-Equipped Drum Handler to Lift, Weigh, Transport and Dispense a drum
- Weigh drum as you pour to dispense exact amount needed
- Accuracy of +/- 0.2% of displayed weight
- Rotate drum 360 degrees forward and back to dispense into vat, hopper, mixer or other container
- MORCINCHTM Drum Handling System
- Automatically adjusts for 22" to 23.5" (56 to 59.7 cm) diameter drum
- Install correct MORCINCHTM Kit to handle plastic or fiber drum
- Insert correct size Diameter Adapter for each smaller drum
|
4173X-P
Fully enclosed crate for export of 515, 525, 611 or 620 Series. Crate is heat treated and certified IPPC IPPC compliant. |
|
55/30SS-14.5
Stainless Steel Adapter for 14-14.5" (35.6-36.8 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
|
55/30SS-16
Stainless Steel Adapter for 15.5-16" (39.4-40.6 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
|
55/30SS-17.5
Stainless Steel Adapter for 17-17.5" (43.2-44.5 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
55/30SS-19
Stainless Steel Adapter for 18.5" to 19" (47 to 48.3 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
|
55/30SS-20.5
Stainless Steel Adapter for 20" to 20.5" (50.8 to 52.1 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
55/30SS-22
Stainless Steel Adapter for 21.5" to 22" (54.6 to 55.9 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
55/30SS-19B
Stainless Steel Diameter Adapter for 18.5"-19" Drum. Integrated brackets adjust to 38" tall drum. **Measure outside diameter 1/2-way down drum. |
|
55/30SS-32G
Stainless Steel Diameter Adapter for 32-gallon Rubbermaid Brute model 2632 |
|
|
55/30SS-44G
Stainless Steel Diameter Adapter for 44-gallon Rubbermaid Brute model 2643 |
|
|
1111i-p
option, factory installed auxiliary valve. Allows metering the lowering of the lift cylinder. Can be closed for postive hold. |
|
|
2993i-P
Replace 8" dia. front wheels with 5" dia. front wheels. |
|
|
3006SSI-P
Option: factory installed stainless steel hydraulic cylinder, 1.5" x 29", on new 400A-96SS, 510SS OR 515SS series. |
|
4556SS-P
Kit:Stainless Steel MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust to 31-39" tall drum. NOT complete drum handler |
|
4560BSS-P
KIT: Stainless steel MORCINCH Top Rim Clamp to prevent a RIMMED plastic or fiber drum from slipping. Adjust for RIMMED 30-55 gallon drum. |
|
5115ssi-p
OPTION: Factory installed 2" x 3' Web Strap and Stainless Steel Ratchet on NEW MORCINCH Drum Holder. Replaces cinch chain around drum. |
|
|
5597SSI-P
OPTION: Factory installed stainless steel ratchet and pawl on NEW stainless steel MORCINCH drum holder |
|
|
6349-P
KIT, SEAL, 6318-P, 6319-P |
|
|
6388SS-P
STAINLESS STEEL ADAPTOR FOR USE WITH 4556SS-P BRACKET ASSEMBLY IN ORDER TO HANDLE 55 GALLON RUBBERMAID MODEL 2655 |
|
|
6659-P
SEAL KIT FOR 1-1/2" CLYINDER |
|
|
93740-P
Step Down Transformer for Battery Charger used with T-Type Scale Indicator. Required for 220V 50Hz application. |
|
|
CRC-515SS
OPTION: Factory Installed corrosion resistant lift chains on NEW 515SS Series |
|
|
FGO
OPTION: Factory Installed 1-Gallon of Food Grade Hydraulic Oil |
|
|
k208-p
AIR MOTOR SERVICE KIT FOR 290-A-2P |
|
|
LTC4
Load test one unit at Morse factory and ship with Load Test Certificate. NOT for Below-Hook model. |
|
|
SSC-500
OPTION: Factory Installed 6" diameter stainless steel swivel casters on NEW 500 Series Vertical-Lift Drum Pourer |
|
|
SSG-PT
OPTION: Factory Installed stainless steel tilt gears and roller chain on NEW power tilt 400 or 500 Series |
4-digit serial numbers are simply the month & year of manufacture. Example: 1120 is November 2020
CurrentNo videos available.
Specifications
| Full capacity |
800 Lb. (363.20 kg) |
| Half capacity | 500 Lb. (227.00 kg)
Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. |
| Dispense height | 60.0" (152.40 cm) |
| Lift style | Power lift |
| Tilt style | Power tilt |
WARNING – This product can expose you to chemicals including barium sulfate, cobalt, titanium dioxide, and 2-methylimidazole, which are known to the State of California to cause cancer, and bisphenol-A, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to
www.P65Warnings.ca.gov
| Ship length | 72" (182.88 cm) |
| Ship width | 48" (121.92 cm) |
| Ship height | 82" (208.28 cm) |
| Ship weight | 835 Lb. (379.09 kg) |
| Ship class | 150 |
Products
Get in touch
Contact us Monday through Friday from 8:00 AM to 4:30PM
