400A-72SS-120
Stainless Steel Hydra-Lift Karrier with AC Power lift, and Manual drum tilt control
Model 400A-96SS-125 shown - Stainless Steel Hydra-Lift Drum Carrier with Electric power drum lift, and Pull Chain manual drum tilt control.
Model 400A-96SS-125 shown - Stainless Steel Hydra-Lift Drum Carrier with battery power drum lift and pull chain drum tilt.
Drum Lift and Lower Controls
Manual Chain Wheel and Pull Chain to Turn Drum
Some items have Special Edition Morse 100th Anniversary *GOLD* Finish.
Stainless Steel Hydra-Lift Karrier. 72" (183 cm) pour height. AC Power lift w/ 1-PH 60Hz motor. Pull chain tilt. Welds NOT ground or polished.
400A-72SS-120
- Model 400A-72SS-120 has frame made of bead blast finished type 304 stainless steel
- Welds are NOT ground smooth or polished
- Some parts are NOT stainless, such as ratchet, pawl, chain wheel, pull chain, wheels, motor and hydraulics
- Gears and sprockets are NOT stainless, but are covered with guards
- Has 60Hz Electric power drum lift, but Pull Chain manual drum tilt
- Hold momentary switch to raise drum
- Pull Chain controlled drum tilt
- Manual release valve lowers drum
- Dispense drum at up to 72" (183 cm) high
- NOT for use in hazardous areas
- We recommend the
MORStopTM Tilt-Brake Option to automatically lock drum tilt angle, until the operator turns it
Hydra-Lift Karriers Lift, Move and Dispense a drum- Rotate drum 360 degrees forward and back to dispense into vat, hopper, mixer or other container
- MORCINCHTM Drum Handling System
- Drum Holder Automatically adjusts for 22" to 23.5" (56 to 59.7 cm) diameter drum
- Install correct MORCINCHTM Kit to handle plastic or fiber drum
- Insert correct size Diameter Adapter for each smaller drum
General
| Full Capacity | 800 Lb. (363.20 kg) |
| Half-full Capacity | 500 Lb. (227.00 kg)
Half-full capacity is an indication of the capacity for an unbalanced, bottom-heavy drum. A partially full drum with an unbalanced and shifting load is harder to tilt than a full drum. |
| Dispense height | 72.0" (182.88 cm) |
| Lift style | Power lift |
| Tilt style | Manual tilt |
Motor information
| Phase | 1 |
| HP | 1.00 |
| Style | TEFC (Totally enclosed fan cooled) |
| Explosion proof | No |
| Frequency | 60Hz |
| Voltage / Amp draw | 115v / 11.8 |
Shipping information
| Ship length | 67" (170.18 cm) |
| Ship width | 48" (121.92 cm) |
| Ship height | 60" (152.4 cm) |
| Ship weight | 359 Lb. (162.99 kg) |
| Ship class | 150 |
4-digit serial numbers are simply the month & year of manufacture. Example: 1120 is November 2020
Current
|
2841X-P
Fully enclosed crate for export of 72" 400 Series set up. Crate is heat treated and certified IPPC compliant. |
|
55/30SS-14.5
Stainless Steel Adapter for 14-14.5" (35.6-36.8 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
|
55/30SS-16
Stainless Steel Adapter for 15.5-16" (39.4-40.6 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
|
55/30SS-17.5
Stainless Steel Adapter for 17-17.5" (43.2-44.5 cm) dia. drum. Brackets for up to 38" (96.5 cm) tall drum. Measure diameter 1/2-way down drum. |
|
55/30SS-19
Stainless Steel Adapter for 18.5" to 19" (47 to 48.3 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
55/30SS-20.5
Stainless Steel Adapter for 20" to 20.5" (50.8 to 52.1 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
55/30SS-22
Stainless Steel Adapter for 21.5" to 22" (54.6 to 55.9 cm) diameter drum. Measure diameter 1/2-way down drum. |
|
X02-400-72SS
OPTION: Factory Installed 9" stainless steel hand crank on NEW 400A-72SS Series. Replaces pull chain drum tilt control. |
|
X03-400-72SS
OPTION: Factory Installed 16" diameter stainless steel hand wheel on NEW 400A-72SS Series. Replaces pull chain drum tilt control. |
| 55/30SS-19B
Stainless Steel Diameter Adapter for 18.5"-19" Drum. Integrated brackets adjust to 38" tall drum. **Measure outside diameter 1/2-way down drum. |
|
|
55/30SS-32G
STAINLESS STEEL DIAMETER ADAPTOR FOR 32-GALLON RUBBERMAID BRUTE MODEL 2632 |
|
|
55/30SS-44G
STAINLESS STEEL DIAMETER ADAPTOR FOR 44-GALLON RUBBERMAID BRUTE MODEL 2643 |
| 1111i-p
option, factory installed auxiliary valve. Allows metering the lowering of the lift cylinder. Can be closed for postive hold. |
|
|
3900SSI-P
OPTION: Factory Installed Stainless Steel MORStop Tilt-Brake on NEW manual tilt drum handler. Auto holds drum tilt angle until you move it. |
|
4556SS-P
Kit:Stainless Steel MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust to 31-39" tall drum. NOT complete drum handler |
|
4560BSS-P
KIT: Stainless steel MORCINCH Top Rim Clamp to prevent a RIMMED plastic or fiber drum from slipping. Adjust for RIMMED 30-55 gallon drum. |
|
5115ssi-p
OPTION: Factory installed 2" x 3' Web Strap and Stainless Steel Ratchet on NEW MORCINCH Drum Holder. Replaces cinch chain around drum. |
| 5597SSI-P
OPTION: Factory installed stainless steel ratchet and pawl on NEW stainless steel MORCINCH drum holder |
|
| 6388SS-P
STAINLESS STEEL ADAPTOR FOR USE WITH 4556SS-P BRACKET ASSEMBLY IN ORDER TO HANDLE 55 GALLON RUBBERMAID MODEL 2655 |
|
| 6746-P
KIT, SEAL, 1.5" CYL, 783K-P |
|
| FGO
OPTION: Factory Installed 1-Gallon of Food Grade Hydraulic Oil |
|
| SSG-MT
OPTION: Factory Installed stainless steel tilt gears and chain on NEW manual tilt 400 or 500 series. 800 Lb. capacity |
California Proposition 65 Information
For more information go to www.P65Warnings.ca.gov
Popular Options
View all options
Kit:Stainless Steel MORCINCH Bracket to prevent RIMLESS or RIMMED plastic drum from slipping. Adjust to 31-39" tall drum. NOT complete drum handler
Stainless Steel Adapter for 18.5" to 19" (47 to 48.3 cm) diameter drum. Measure diameter 1/2-way down drum.
OPTION: Factory Installed Stainless Steel MORStop Tilt-Brake on NEW manual tilt drum handler. Auto holds drum tilt angle until you move it.
OPTION: Factory installed 2" x 3' Web Strap and Stainless Steel Ratchet on NEW MORCINCH Drum Holder. Replaces cinch chain around drum.